Back to Back Channel Cantilever Arm

The Double Channel Cantilever Arm Bracket (IC/CARM/BB) is suitable for supporting medium to heavy loads. The double channel cantilever arm bracket is available in lengths from 150mm to 1200mm for supporting Speedway cable ladder and cable tray. Where heavier load carrying performance is required, the double channel cantilever bracket can be reinforced using a cantilever arm prop (IC/CARM/BB). The double channel cantilever arm bracket, based on conventional back to back strut profiles, is suitable for use with Speedway External Flange Clamps (SW/EFC/#), Adaptable Fixing Brackets (SW/AFB/#) and Hold Down Brackets (SW-/HDB/#) for Speedway Cable Ladder and for Cable Tray is suitable for use with the tray hold down bracket (HDB) or for direct fixing through the bed of the cable tray using conventional M6 channel nuts. The loading table below gives the recommended maximum load for each size of double channel cantilever arm bracket for supporting uniformly distributed loads (UDL) such as cable tray or for supporting Speedway Cable Ladder (which should be uniformly loaded to apply two equal point loads onto the cantilever arm).